Robotics & IoT
Explore the full AGIBOT range. Humanoid and quadruped robots, available exclusively in the UK through Scancom.
“Every great technology wave needs an ecosystem. We are building these layers for physical AI in the UK — and this starts with Agibot.”
Scancom is the UK master distributor for AGIBOT —
ranked #1 worldwide in humanoid robot shipments.
robot shipments 2025
shipped worldwide
distribution rights
launch event 2026
The lineup
Choose your robot
The full AGIBOT range — available exclusively in the UK through Scancom.
UK Launch Event
AGIBOT arrives in the UK.
Robot + SIM connectivity. One source.
Every AGIBOT unit ships with Scancom IoT SIM connectivity pre-configured. No other UK distributor can offer this. One supplier, one invoice, always connected.
C5
Sweep, scrub and dry mop in a single pass. Up to 1,980 m²/h across supermarkets, transport hubs, hospitals and factories — with a station that services itself.
at 550 mm scrubbing width
sweep and scrub in one pass
premium components, lower lifecycle cost
Sweep, scrub and dry mop in one pass
A dual-roller brush system integrates sweeping and scrubbing, with high water flow and 25 kg of downforce lifting stubborn stains first time. A pioneering dual-chamber squeegee pulls water out of grout lines for a genuinely drier finish, and edge cleaning with missed-spot detection closes off the corners.
The maintenance does itself
The fully automated station handles charging, clean water refill at 7–10 L/min and dirty water drainage at 10–15 L/min. The industry-first self-cleaning dirty water tank runs a four-minute cycle that halves daily maintenance time — no rinsing tanks by hand at the end of a shift.
Commercial grade. Genuinely unattended.
The C5 is AGIBOT's first intelligent cleaning robot for mid-to-large indoor environments. LiDAR fused with visual perception handles navigation across supermarkets, office buildings, transport hubs, factories, commercial complexes and hospitals. It integrates with access control and lifts, so it can work floors overnight with nobody on site.
| Max cleaning efficiency | 1,980 m²/h |
| Scrubbing width | 550 mm |
| Debris pickup rate | 95% |
| Scrubbing runtime | 3 hours |
| Downforce pressure | 25 kg |
| Clean water tank | 90 L extra-large |
| Dirty tank self-cleaning | 4 minutes — industry first |
| Battery | 24 V · 80 Ah |
| Total weight | 170 kg |
| Operating noise | <68 dB(A) |
| Fan lifespan | 10,000 hours |
| Positioning | LiDAR + visual perception fusion |
| Station · water tank | 8 L |
| Station · clean water refill | 7–10 L/min |
| Station · dirty water drainage | 10–15 L/min |
| Station · power | 1,800 W max · 100–240 V input |
| Station automation | Auto charge · auto refill & drain · tank self-clean |
| Compatible surfaces | Poured concrete, marble, epoxy, PVC, emery flooring |
| Connectivity | Scancom IoT SIM bundle optional |
Capabilities
